How Do I Sync My Spypoint Camera?

SPYPOINT Link-Micro-Lte Cellular Trail Camera User Guide

In the box

1x LINK-MICRO-LTE photographic camera
1x Antenna holder
1x Installation strap
1x Quick outset guide
1x SIM bill of fare that is pre activated and inserted in the camera

NOTE: Memory carte and batteries are sold separately.

User manual, latest firmware, and FAQ available at:
support.spypoint.com

Components

1. Antenna
2. Detection lens
3. MicroSD card slot
4. Light sensor
5. Filibuster light
6. Photo lens
7. LED
8. ON/OFF switch
9. "STATUS" lite
10. SIM carte slot
11. Bombardment compartment
12. Battery holder
13. Slot for installation strap
14. Locking latch
15. Cablevision lock hole
16. 12V jack
17. Standard ¼"-20 tripod mount
    
    
    

Getting started

SELECT A POWER SOURCE

• Lithium or alkaline metal AA batteries
• 12V rechargeable battery (#KIT-12V)
• three.7V rechargeable battery pack (#LIT-x

NOTE: We recommend using the SPYPOINT #LIT-10 rechargeable lithium battery pack, sold separately.

FOR BEST RESULTS AND NO LEAKAGE:

• Utilise only new lithium or alkaline batteries.
• Exercise not mix one-time and new batteries.
• Do not use rechargeable AA batteries (their lower voltage tin can generate operational issues).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock and open the LINK-MICRO-LTE door.
• Take the bombardment holder out.
• Insert the AA batteries into the bombardment holder following polarity (+) and (-) indications.
• Place the battery holder back into the battery compartment.

FORMATTING YOUR MicroSD Menu
Before inserting the MicroSD card into your camera, it must be reformatted via a figurer to ensure proper functionality.

Memory bill of fare is sold separately. Whether yous choose to use a MicroSD card you previously used in another device or a brand new one yous've only bought, its capacity must not exceed 32 GB and information technology must be reformatted. Do no use the "Quick format" selection.

INSERTING A MicroSD CARD

• Ensure the camera is turned off.
• Insert a MicroSD retentiveness card (up to 32 GB capacity) into the MicroSD carte du jour slot with the label facing up.
• The card is inserted correctly when a click is heard.

ACTIVATING YOUR Photographic camera

 You must activate your photographic camera through the gratuitous "SPYPOINT app" or by logging on to the SPYPOINT.COM website.

FINDING THE ACTIVATION Lawmaking

The activation code is located inside the photographic camera'south bombardment compartment behind the battery holder. You will need this unique code to activate the LINK-MICRO-LTE.

SPYPOINT APP

Follow these steps:

1. On Google PlayTM or the App StoreTM, search for "SPYPOINT app".
2. Download and install the app on your smartphone or tablet.
3. Start the app. Select "ACTIVATE A DEVICE". In the listing, select "LINK-MICRO-LTE" and then follow the steps.
4. When complete, a confirmation e-mail will be sent to you lot with instructions on how to finalize the creation of your account volition be sent to you.
5. Log in to the SPYPOINT app using your email and password.

ACTIVATING YOUR Camera

SPYPOINT website

Follow these steps:

1. On the SPYPOINT website, select "LOGIN" in the peak navigation carte du jour. On the displayed page, select "Register," fill out the required fields, then log in.
2. Select the + sign on the far correct of the page; in the list, select "LINK-MICRO-LTE," and so follow the steps.
3. When complete, a confirmation e-mail volition be sent to yous with instructions on how to finalize the creation of your business relationship will be sent to you.
4. On the website, log in using your email and password.

Annotation: You can actuate additional cameras and switch between them in the SPYPOINT app or the "MY Account" section of the SPYPOINT website.

CHOOSING A Photo TRANSMISSION Programme FOR YOUR Photographic camera

Become to
https://www.spypoint.com/en/spypoint-experience/plans to read the latest offers and cull the plan that suits you.

CONFIGURING YOUR CAMERA

Both the SPYPOINT app and website allow you lot configure all the camera settings remotely. They as well provide basic information on your photographic camera – such as: cellular betoken force, battery level, and MicroSD carte du jour space used. This information is based upon the latest connection with your camera. New settings take effect every time the camera connects with the SPYPOINT app or website. Below are the well-nigh basic settings you volition configure.

Basic Photo SETTINGS

Delay: Allows you to set the time interval between each detection
earlier the photographic camera takes the next photograph.

Multishot: Allows you to set the number of photos per detection
(up to 2) with a v-second delay between each photo.

Sensitivity: Allows you to prepare the detection sensitivity of the camera.

Camera name: Allows you to name each owned camera.

CELLULAR SETUP

CELLULAR SETUP
First transfer fourth dimension: Allows y'all to cull the time when the camera makes its first transfer of the solar day.

Transfer frequency: Allows you to choose the number of daily transfers.

ADVANCED OPTIONS/CONFIGURATION

Schedule: Allows you to set the period of operation for each
twenty-four hour period of the week. For a 24-hour operation style, both the start
and stop times must be 12 AM.

Notation: Photographic camera transfers are set by default to every four hours from midnight.

STARTING YOUR Camera

1. Turn on the camera.
2. The dark-green "STATUS" light volition flash while searching for a signal (can take a few minutes).
3. The "Condition" light volition light up in one of the following 3 colors:
    Carmine: Bereft point.
    Orange: Acceptable indicate.
    Dark-green: Optimal signal.
4. When the top correct light flashes red, 30 seconds remain before the photo mode is turned on. This allows y'all to leave the surface area without being photographed.
5. The camera is ready for utilise when all the lights turn off.
6. If the light is blood-red during step three, yous should:
   1. Plough your camera off and then dorsum on.
   2. Retry while pointing the antenna at different angles.
   3. Try moving it to a spot with better point.
   4. Try our #CA-01 long-range cellular antenna (sold separately), which could assist meliorate signal forcefulness.

INSTALLING YOUR Camera

1. Mount the photographic camera using the installation strap.
2. The camera should be at the same height as the fauna's mid-trunk.
3. The targeted animal should be at 25 feet/seven.5 meters abroad from the photographic camera.
4. For brighter pictures at night, ensure you have elements in the background to reflect the IR wink.

DISPOSAL

ONLY Employ ORIGINAL SPARE PARTS AND ACCESSORIES.

If one twenty-four hours your camera has been used then intensively that it has to be replaced, or if you lot no longer have any employ for it, you lot are obliged to dispose of it at a recycling eye.

Information on return points for your electrical appliance tin exist obtained from your local waste material disposal company or from your local authoritative offices.

Electrical appliances non only contain valuable recyclable raw materials, only besides substances which, if disposed of improperly, can affect public health and the environment. Aid ensure that valuable raw materials are recycled when you return your sometime appliance to a central collection indicate.

The WEEE (Waste matter Electrical and Electronic Equipment Directive ) symbol represents the obligation that the labeled camera to be sent to a separate center for the proper recycling of electrical and electronic equipment.

FREQUENCY

FREQUENCY RANGE:
800/ 850/ 900/ 1900/ 2100MHz

MAXIMUM Transmission Power:

FREQUENCY	MAX
GSM850	33DBM±2DB
EGSM900	33DBM±2DB
33DBM±2DB	30DBM±2DB
PCS1900	30DBM±2DB
GSM850 (8-PSK)	27DBM±3DB
EGSM900 (viii-PSK)	27DBM±3DB
DCS1800 (8-PSK)	26DBM±3DB
PCS1900 (viii-PSK)	26DBM±3DB
UMTS 2100	24DBM+1.7/-3.7DB
UMTS 1900	24DBM+1.7/-3.7DB
UMTS 900	24DBM+1.7/-3.7DB
UMTS 850	24DBM+ane.vii/-3.7DB
UMTS 800	24DBM+1.7/-3.7DB

FFC

THIS DEVICE COMPLIES WITH Role 15 OF THE FCC RULES.

Operation is subject to the following ii conditions:

1. This device must non cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

For a complete list of specifications, features, and settings, visit our LINK-MICRO-LTE page at world wide web.spypoint.com.

Thank you FOR CHOOSING

FAQ, user manual & latest
firmware available at:
Support.SPYPOINT.COM

JOIN THE Customs

Sit dorsum and relax as this device is covered past the "Know you're covered" 2-year warranty. We strive to provide our customers with a positive experience and an outstanding service.

Documents / Resource

References

Source: https://manuals.plus/spypoint/link-micro-lte-cellular-trail-camera-manual

Posted by: whitemintough.blogspot.com

Share this post