How To Set Up Reolink Poe Camera
How to Add Reolink IP Cameras to Reolink PoE NVR
Applies to: All Reolink IP Cameras (battery-powered caameras excluded)
Reolink PoE NVR allows you to record videos for Reolink IP cameras without using a computer. To do that, y'all need to add the camera to the NVR first. The cabling for PoE NVR is shown as below.
Y'all may then follow the steps beneath to add Reolink cameras to Reolink PoE NVR.
Step 1. Connect your Reolink IP cameras to the Reolink PoE NVR. There're two different means of powering your IP cameras:
a. Power the IP cameras via the PoE NVR. You may connect the IP cameras to the PoE NVR directly via an Ethernet cable. (An Ethernet cable is likewise needed during the initial setup for WiFi cameras)
b. Power the IP cameras using a DC power adapter. For PoE cameras, y'all may connect the camera to the same router that the NVR is connected to; for WiFi cameras, select the WiFi of the router that the NVR is connected to.
Notation: Make sure all the IP cameras you want to add to the NVR are connected to the same network (LAN) as the NVR. Otherwise, the cameras won't be shown on the scanned list and cannot be automatically added to the NVR.
Step 2. Log in to your NVR, and go to IP channel.
Step iii. Select Automobile Add together, and click Scan then that all the cameras in the same LAN can be automatically shown on the list.
Annotation: The number of cameras that can exist added to the NVR may vary depending on the NVR channel numbers of the NVR.
Step 4. If yous accept never changed the password of the IP cameras (the default password of the IP photographic camera is blank) and in that location are plenty channels for all the cameras, you may press Use to add together all the IP cameras to the NVR.
However, if you lot accept changed the login passwords of the IP cameras or at that place is no spare channel to display all the IP cameras, yous may need to go through a few more steps.
Footstep 5. If you have an 8-channel NVR and more than 8 IP cameras, please cull the 8 of them you want to add to the NVR and manually change the other cameras' Channel to None.
Note: Y'all may assign the IP cameras to any aqueduct you want; merely you cannot have two cameras on the same aqueduct, or configurations would fail to be saved.
Pace vi. If you have changed the User Name and the Password of your cameras, please drag the menu bar to the password column and apply the soft keyboard input the required information.
Step 7. Click Apply to relieve and apply the configuration.
Related articles
- How to Add Reolink NVR via Browser in the LAN
- Getting Started with NVR Kit
- APP/Client Shows Username or Password is Incorrect in Login Page
- The Requirements of WiFi Networks for Reolink WiFi Cameras
- Does Reolink Have US Phone Support
Source: https://support.reolink.com/hc/en-us/articles/360007011053-How-to-Add-Reolink-IP-Cameras-to-Reolink-PoE-NVR
Posted by: whitemintough.blogspot.com
0 Response to "How To Set Up Reolink Poe Camera"
Post a Comment